| Parameters |
Details |
| Wave form |
| Waveform type |
Sine, square, pulse, sawtooth, triangle, Sin (x) / x, index (rise/fall), heart rate, Gaussian, half sine, noise, DC |
| Waveform lenght |
4～16000 points |
| Waveform amplitude resolution |
12bits |
| Sampling rate |
100MSa/S |
| Sinusoidal harmonic rejection |
－60dBc~－35dBc(to 20MHz) |
| Pulse wave, square wave |
time of rise/fall edge：≤18ns Overshoot：≤3% |
| Duty cycle of square wave |
50% |
| Frequency |
| Frequency range |
1μHz～frequency upper limit; resolution：1μHz |
| Range of sine wave |
1μHz~20MHz |
| Range of square wave |
1μHz~10MHz |
| Freq accuracy |
±（5×10-5+40mHz） |
| Freq stability |
±5×10-6/3 hours |
| Pulse |
| Duty cycle |
0.1%～99.9% |
| Amplitude |
| Open circuit |
2mVp-p～20Vp-p |
| Resolution |
20mVpp（amplitude >2V），2mVpp（amplitude <2V） |
| Amplitude accuracy |
±(1%+2mVrms)( high impedance, RMS, frequency 1kHz） |
| Amplitude stability |
±0.5%/3 hours |
| Amplitude flatness |
±5%(freq<1MHz)，±10%(1MHz<freq<10MHz)，±20(10MHz<freq<60MHz) |
| Output impedance |
50Ω |
| Offset |
| Offset Range |
±10V(high impedance） resolution：20mV |
| Offset accuracy |
±(1%+20mV） |
| Sweep |
| Sweep range |
Set the start point and end point arbitrarily |
| Sweep steps |
Any value that more than resolution |
| Sweep rate |
10ms～60s/steps |
| Sweep mode |
Forward sweep, reverse sweep, sweep up and down |
| Manual sweep |
steps/times |
| FM |
| Modulated signal |
Inner or ext |
| FM deviation |
0%～20% |
| AM |
| Modulated signal |
Inner or ext |
| AM depth |
0%～120% |
| TTL output
characteristics |
| Waveform |
Square wave, Rising/falling time≤18ns |
| Frequency |
Output A |
| Amplitude |
TTL，CMOS compatible，low level<0.3V，high level>4V |
| Power
supply |
| Voltage |
AC220V (1±10%) / AC110V(1±10%)（Note the position of the input voltage switch） |
| Frequency |
50 Hz（1±5%） |
| Consumption |
<45VA |
| |
|
